HP LaserJet 1022 Firmware Update Utility for Mac

Sunday, September 16th 2018. | Firmware

HP LaserJet 1022 Firmware Update Utility for Mac if HP developed in Windows, Mac and Linux Field want to connect Your HP Printer to device development environment through the Drivers and Software.

global-driver.com Will guide you in the right way to Download any HP Printer Drivers that you are looking for. Please note that the driver according to your own model at home/office.

ads

HP LaserJet 1022 Firmware Update Utility for Mac

You don’t have to worry about performance and compatibility with your computer as Drivers and Software to HP LaserJet 1022 in the latest version,They provide software and drivers for all types of HP printers available in the market. You just need to choose one that is suitable for your current printer.

“HP LaserJet 1022 Firmware Update Utility for Mac” Specifications in Model Configurations Download, Support Windows and Mac OS X with your operating system”.

HP LaserJet Firmware Update Utility – HP LaserJet 1022 Printer series

Driver Detail:
Type: Firmware
Version: 20120928
Release date: Feb 28, 2014
Filename:HP1022_FW_Upgrade_Security_20120928.dmg
Download
File Size: (4.0 MB)

Description:
This utility is for use on Mac OS X Operating systems.

The utility can be used with a USB or network connection. Be sure to use the firmware update utility that is specific to your printer model.

This update is recommended for the HP Color LaserJet 1022n/nw Series that have a firmware version older than the one posted.

This utility updates the printer firmware version to the latest version.

The firmware version can be found on the Self Test/Configuration Page. To print a configuration page press and hold the go button (approximately 10 seconds) until the printer LED’s begin to flash. Release the go button, the configuration pages will print.

Fixed Issues:
Changing the RFU setting:

  • Pressing the cancel button for 10 seconds causes the printer to enter the RFU enable/disable mode. The printer signals that it is in this mode by flashing the LED that indicates the current state.
  • Pressing the cancel button again will save the current state.

While in RFU enable/disable mode, there are 4 possible states the printer can be in. Pressing the go button will cause the printer to move to the next state. LEDs signal the current state. The 4 states are:
1. If the Ready LED is flashing, RFU is enabled.
2. If the Attention LED is flashing, RFU is disabled.
3. If the Go LED is flashing, RFU is locked.
4. If none of those LEDs are lit, the printer is in cancel mode. Exiting RFU enable/disable in cancel mode will return the printer to its previously saved configuration.

The current RFU setting can be viewed at the bottom of the Config Page (under the “Print Settings” heading).

System Requirements:

* The HP LaserJet 1022n/nw Firmware Update Utility can be performed using either a Network connection or USB port.
* When using the USB port or the network connection, the HP LaserJet 1022 software must be installed prior to using this utility.
* The HP LaserJet 1022n/nw printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.

Operating Systems:
Mac OS X 10.4
Mac OS X 10.5
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8


HP LaserJet Firmware Update Utility – HP LaserJet 1022 Printer series

Driver Detail:
Type: Firmware
Version: 20130314
Release date: Feb 28, 2014
Filename:HP1022_FW_Upgrade_Security.dmg
Download
File Size: (6.0 MB)

Description:
This utility is for use on Mac OS X Operating systems.

The utility can be used with a USB or network connection. Be sure to use the firmware update utility that is specific to your printer model.

This update is recommended for the HP Color LaserJet 1022n/nw Series that have a firmware version older than the one posted.

This utility updates the printer firmware version to the latest version.

The firmware version can be found on the Self Test/Configuration Page. To print a configuration page press and hold the go button (approximately 10 seconds) until the printer LED’s begin to flash. Release the go button, the configuration pages will print.

Fixed Issues:
Firmware Version 20130314:

  • Fix the wireless configuration lost issue
  • Added the “RFU” setting to control remote firmware updates. The options are “Enabled”, “Disabled”, and “Locked”. The default value is “Locked” – preventing firmware updates. It must be changed to “Enabled” before another firmware update will be permitted.

Changing the RFU setting:

  • Pressing the cancel button for 10 seconds causes the printer to enter the RFU enable/disable mode. The printer signals that it is in this mode by flashing the LED that indicates the current state.
  • Pressing the cancel button again will save the current state
  • While in RFU enable/disable mode, there are 4 possible states the printer can be in. Pressing the go button will cause the printer to move to the next state. LEDs signal the current state. The 4 states are:
    • If the Ready LED is flashing, RFU is enabled.
    • If the Attention LED is flashing, RFU is disabled.
    • If the Go LED is flashing, RFU is locked.
    • If none of those LEDs are lit, the printer is in cancel mode. Exiting RFU enable/disable in cancel mode will return the printer to its previously saved configuration.

The current RFU setting can be viewed at the bottom of the Config Page (under the “Print Settings” heading).

System Requirements:

  • The HP LaserJet 1022n/nw Firmware Update Utility can be performed using either a Network connection or USB port.
  • When using the USB port or the network connection, the HP LaserJet 1022 software must be installed prior to using this utility.
  • The HP LaserJet 1022n/nw printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.
  • It can be used with Network or USB connections.

Operating Systems:
Mac OS X 10.4
Mac OS X 10.5
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8

HP LaserJet 1022n/nw Series Flash Firmware Update using Mac OS X Installation

Instructions for the HP LaserJet 1022n/nw Series Flash Firmware Update using Mac OS X operating systems:

Flash Firmware Update Notes: 

• The Firmware Update Utility can use a USB or network connection to the printer.
• The HP MFP printer must be on and in a READY state as shown by the LED lights on the control panel and remain powered on during the entire firmware update process.
• Depending on the processor speed of your Mac, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the pc screen completes, this is normal.
• Once the update process has started, do not use your computer for any other activity until the process is complete.
• Inform others connected to the product, both network and USB, to refrain from using the printer during the update period.
• Do not power cycle the product or the computer until the firmware update process is complete.

Process: 

1. Download the flash firmware updater file from HP.com to the Mac desktop.
2. Turn the printer off and then back on to clear main printer memory.
3. Double click on the flash firmware update utility file. An HP firmware update window will open.
4. Select the appropriate printer in the dialog window. If you assigned a different name to the driver, choose the name that represents the correct printer.
5. Click on “Send Firmware” when ready to proceed.
6. The progress bar will begin to move to the right indicating information being transferred.
7. DO NOT power cycle the product or the computer during this process or the product may become unstable and or unusable without further attention from HP. The flash firmware update can take up to 5 minutes to complete. Please be patient.
8. During the product flash firmware update, the display on the product control panel will display “Erasing – Programming – Complete – Hewlett-Packard – Ready – Initializing – Ready”. Once the download is finished the printer will be in the Ready state.
9. At the conclusion of the firmware update, the dialog window will show a smiley face. Click on exit.
10. The flash firmware update process is complete.

If it is desired to verify the update, press and hold the go button (approximately 10 seconds) until the printer LED’s begin to flash. Release the go button, the configuration pages will print. The configuration report will show the current firmware revision in the Product information block.

ads

Leave a Reply

avatar
  Subscribe  
Notify of